Respirable Dust Sampler

Features:

• Superb functionality
• High robustness
• Easy to use

Specifications :

Flow Rate : - 0.9 - 1.4 m3 /min free flow

Particle Size : - Particles of 10 microns & below collected on Filter Paper holder. SPM

bigger than 10 microns Collected in a separate sampling bottle under the

cyclone.

Sampling Time : - 28 hours (maximum)

Sampling Time Record: - 0 to 9999.99 hrs. Recorded on a Time Totalizer.

Automatic Sampling :- 24 hrs programmable timer to automatically shut off the system after pre set

time interval.

Power Requirement : - Nominal 220 V, Single Phase, 50Hz AC mains supply.

Size & Weight : - 430 x 320 x 930mm.38Kg

Gaseous Flow Rate :- 0.3 lpm measured using plastic body flow meter.

Sampling Train : - Four inlet one outlet manifold with built in needle valves for flow control of each inlet.

Absorbers : - 4Nos. Of 35 ml. Glass impingers.

Size & Weight : - 240 x 125 x 360 Inch.38Kg

Ice Trey : - fiber

voltage stabilizer : Power Cut Minimum & Maximum (170 to 240 )

Particle Size: Omni-directional air inlet with PM 10 separation through an impactor Followed by PM 2.5 separations through a WINS Impactor.

Sampling rate:Constant sampling rate of 1m3/hr unaffected by voltage fluctuation And Filter choking maintained by critical orifice system.

Filter Media:Filter holder designed to accept any standard 47 mm diameter filter Media.

• Sample Volume: Dry Gas meter records the total air volume sampled.
• Power Requirement: Single phase AC 220 Volts, 50 Hertz supply. Sampler Unaffected by
• +/- 10% fluctuation in supply voltage.